PMMA / Acrylic (X522HT)
It is a vacuum-casting polyurethane resin and is generally used to produce parts having properties similar to PP and HDPE.
The PP (PU8570) material is extensively used by manufacturers to vacuum cast interior and exterior components of the automobile.
PP (8550) is developed with the mixing of Polyol and Isocyanate at the ratio of 1:2. It is commonly used to manufacture PP or PE products.
PMMA / Acrylic (UPX5210)
Acrylic (UPX5210) is an anti-UV transparent urethane resin and is mainly used for casting in silicone moulds.
PMMA / Acrylic (PX5210HT)
The material has a viscosity of 500 – 650 MPa and is resistant to heat up to 105-degree celsius and is used to produce vacuum cast parts.
It is a type of urethane material for vacuum casting applications. It comes in black colour and does not possess any colourability.
The material has good reproduction accuracy and is mainly used to manufacture parts with high thermal resistance ability.
Some of the most common applications of PC (PX510) are vacuum-casted parts such as prototypes, models, figurines and other toys.
It is a polyurethane resin developed with the combination of Polyol (A) and Isocyanate (B). The material has an impact strength of 10 KJ/m2.
The ABS (UP4280) material can be vacuum cast in the silicone mould to manufacture high-end prototypes and mock-ups.
The material is a combination of unreinforced polycarbonates and ABS. It is used by manufacturers to produce impact-resistant products.
ABS PX100 is a tough, durable and impact-resistant material that is often used in the manufacturing of prototypes.
ABS PX1180 is the non-reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS). It is available in black color.
ABS PU8263 is a high-strength, heat-resistant and wear-resistant material. It is generally used for vacuum casting of high-strength parts.
It is a polyurethane elastomer with good abrasion resistance and tear strength. It also has low compression set and good hydrolytic stability.