Titan Grade 5 / 3.7164 / 3.7165 / Ti-6Al-4V
- Alternative Designations: Titan Grade 5 | Ti6Al4V
Colors:
- Any color is achievable with finishing
Description:
This contains 6.75% Aluminum, 4.5% vanadium and iron in trace amounts. It has exceptional strength compared to pure titanium but retains the same stiffness and thermal properties. It has easy machinability and weldability. With high strength and corrosion resistance, it can withstand a wide range of adverse environmental factors, including seawater. It is often used in subsea oil and gas structures.
Material Properties
Processes:
Special properties
- Corrosion resistance
- Weldability
- Water resistance
- Fatigue resistance
Property | Value, metric | Value, Imperial |
---|---|---|
Density | 4.4 g/cm3 | 4.4 g/cm3 |
Elongation at Break | 14% | 14% |
Hardness | - | - |
Ultimate Tensile Strength | 1080 MPa | 156.6 ksi |
-
CNC machined part without surface finishes (3D render, aluminium)Bead blasting (3D render)
Bead blasting
Bead blasting involves spraying a pressurised stream of tiny beads of media, plastic or glass beads, from a nozzle onto the surface of the part. This removes the burrs and imperfections, leaving a smooth finish.
Notes:The recommended part size is 6-600 mm in both height and width. Smaller parts are hard to hold and tough to produce an even surface.
Final result:
- Uniform, matte or satin-like appearance
- Slightly grainy in the touch
-
Electroless nickel plating
Electroless nickel plating provides a uniform nickel coating, which offers protection from corrosion, oxidation, and wear on irregular surfaces.
Final result:
- Protection from corrosion, oxidation and wear on irregular surfaces
- Brighter appearance
-
Gold plating
Gold plating provides good corrosion and tarnish resistance. Gold has low contact resistance, excellent conductivity, and solderability.
Final result:
- Gold-like appearance
- Increased corrosion and tarnish resistance
-
Powder coating
Provides a continuous, protective color finish on parts using evenly applied, heat-cured paint. The finish is usually tougher and even compared to conventional painting.
Notes:Metals like aluminium and steel can be efficiently coated with polymer powders.
Available colors:
- Black
- Any custom RAL color
-
Custom Finishing
If you select a custom finish in the Instant Quoting Engine it will require manual review. Manual quoting usually takes 1-2 business days.
Notes:Submitting for manual review with a custom request does not guarantee a quote.